DYNICE® 78 ROPE – ULTRABEND
The DynIce Ultrabend 78 is based on the new bending fatigue resistant fibre Dyneema® XBO with same low creep properties as SK78.
The bending fatigue tolerance is up to 5 times higher than for DynIce 78 and therefore very suitable for running rigging which have to tolerate a lot of bending under high load and high temperature.
DYNICE® 78 ROPE – ULTRABEND
| Diameter mm |
Weight kg/100m |
Breaking Strength ton | kN |
|
|---|---|---|---|
| 3 | 0.6 | 0.9 | 8.8 |
| 4 | 1.1 | 1.7 | 16.7 |
| 5 | 1.6 | 2.5 | 24.5 |
| 6 | 2.4 | 3.7 | 36.3 |
| 7 | 3.1 | 4.8 | 47.1 |
| 8 | 3.9 | 5.9 | 57.9 |
| 9 | 5.2 | 7.8 | 76.5 |
| 10 | 6.2 | 9.3 | 91.2 |
| 11 | 7.8 | 11.6 | 114 |
| 12 | 9.5 | 14.3 | 140 |
| 14 | 12.8 | 19.1 | 187 |
| 16 | 16.3 | 23.9 | 234 |
| 18 | 21.1 | 30.6 | 300 |
| 20 | 25.7 | 36.6 | 359 |
| 22 | 31.1 | 43.7 | 429 |
| 24 | 36.3 | 50.5 | 495 |
| 26 | 41.8 | 57.4 | 563 |
| 28 | 47.4 | 64.5 | 633 |
| 32 | 57.8 | 77.2 | 757 |
| 36 | 68.5 | 89.9 | 882 |
| 40 | 80.9 | 104.7 | 1027 |
| 44 | 96.2 | 123.0 | 1207 |
| 48 | 114.1 | 144.3 | 1416 |
Breaking strength is tested according to ISO 2307.
Splicing can reduce strength up to 10% of table breaking strength.
| Material | Dyneema® XBO SK78 |
|---|---|
| Construction | 1×12 strand for 2,1–10 mm 2 x12 strand for 12–84 mm |
| Elongation | 4,0% after pre-tensioning |
| Colour | Gray |
| Density | 0,97 |
| Melting point | 144 –152°C |
| Max Working temp. | 60°C |
| Water uptake | 0% |
| UV resistance | Excellent |
| Abrasion resistance | Excellent |
No downloads for this product.
